Newton hunts for lead pipes in town water system. What homeowners need to know (2024)

Bruce A ScrutonNewton New Jersey Herald

NEWTON — The town may soon deploy swordfish to search its water lines for lead pipes, as it seeks to remove the hazardous metal from its more-than-century-old water system.

"Swordfish" is the brand name of a device that looks similar to a plumber's snake used to clear drain clogs. A swordfish, however, has a probing wire tipped with an electrical device that, when it touches the insides of a pipe, can tell whether it is made of lead, copper, galvanized steel or plastic.

High lead levels in drinking water can cause a range of health problems, including lasting damage to brain development in children. Gov. Phil Murphy signed a law in 2021 that requires community water systems in New Jersey to identify all lead service lines, notify the public about their presence and then replace those pipes by 2031.

Newton's water system owns the water lines that split off its water mains up to the connection to individual property owner service lines. It is those final connecting lines that need to be tested throughout the town, potentially via Swordfish.

Towns, homeowners split responsibility for lead abatement

Those service lines are the responsibility of the individual property owners and could cost from $8,000 to $12,000 per line for replacement, town officials said at Monday's council meeting, though there is some state money available to defer the costs.

It's up to the town to identify those lead pipes, however, and officials said Monday that the Swordfish technology could make that process more efficient and less disruptive.

The council has scheduled a public hearing for its May 29 meeting on an ordinance to spend $90,000 for two of the devices. Without them, crews most often need to dig a hole in a lawn or through a sidewalk or road, to get to the connecting lines.

With the Swordfish, the operator can "fish" a wire through a connector box or main and reach a service line. The contacts are engaged and a readout identifies the material in the service pipe. A sample of the inside of the pipe is also taken by the probe and tested.

Hundreds of service lines must be tested

At Monday's meeting, Town Manager Tom Russo and Town Engineer Dave Simmons briefed the council on their progress and the need for the Swordfish technology. According to figures from manufacturer Electroscan Inc., a single Swordfish unit costs $78,000, plus training. However, two units cost just $90,000 for the pair.

Already, Newtown has identified about 1,000 town-owned service lines, but there are more than 1,700 more to be checked, Russo and Simmons said.

More: EPA announces new drinking water standards. How could NJ water systems be impacted?

Of the 1,000 service lines already investigated, all but 253 contained lead. Some of the branch lines need to be checked as well for the presence of lead piping and 62 of those have been "verified" as lead-free on both sides of the connection.

Water department supervisor Ken Jackel said the average cost to dig an inspection hole is $350 and the town has been using three employees each from the water and sewer department, augmented by DPW employees to do the inspection work now.

Digging up properties

"We have run out of the 'low-hanging fruit', said Simmons. "Now, we need to do the field inspections."

A Swordfish can be operated by 1 to 2 person teams.

In addition to the cost in manpower and time of digging inspection holes, there is the post-inspection issue of replacing landscaping or structures which must be moved to get access to the service line connection. In the more urban section of town, notably along Spring Street, digging also requires jackhammers and refilling the inspection hole with dirt, asphalt or concrete.

There are additional costs as well in areas where the town needs to obtain permits from the state or Sussex County to do work on their highways to access service lines for visual inspection.

Jackel noted that in most locations, crews can access the service line through the property owner's water meter connection, eliminating the need to dig a hole in a lawn or sidewalk. In some areas, access to service lines can be made at curb-side waterline connection boxes.

The Swordfish apparatus has not been formally approved by New Jersey, but is approved in the states of New York and Pennsylvania. He also noted that the City of Baltimore is using the technology.

There is no prohibition against use of the device in New Jersey, Jackel said, adding, "It's up to us."

With the Swordfish units, the department estimated the crews could test 10-20 customers per day. Russo said he would like to get all the testing and inspection done within the next 18 months.

Newton water system dates back to 1895

Newton's water system dates to 1895 and begins at Morris Lake in Sparta. There is a treatment plant at the dam which creates the reservoir.

The water main follows Sparta Glen Brook then moves underground along Sparta Road. There is only a couple of customers before the main line enters the town and branches out through 10-inch cast iron mains, feeding the branches which then feed individual service lines make connections to users.

After the presentation, the council voted to approve an ordinance which will go to first reading at the May 29 meeting. If approved at that meeting, a public hearing is likely to be scheduled for the June 10 council meeting after which the council could approve the purchase of units.

Email: bscruton@njherald.com Twitter/X: @brucescrutonNJH

412,000

Newton hunts for lead pipes in town water system. What homeowners need to know (2024)

FAQs

Newton hunts for lead pipes in town water system. What homeowners need to know? ›

What homeowners need to know. NEWTON — The town may soon deploy swordfish to search its water lines for lead pipes, as it seeks to remove the hazardous metal from its more-than-century-old water system. "Swordfish" is the brand name of a device that looks similar to a plumber's snake used to clear drain clogs.

Do you have to replace lead water pipes? ›

While it is not a legal requirement to replace them, over time lead from these old style pipes can get into your drinking water and potentially damage your health.

How common are lead pipes in homes? ›

An estimated 9.2 million lead service lines (LSLs) serve water to properties in communities across the United States.

How to tell if water pipes are lead? ›

If the scraped area is shiny and silver, your service line is lead. A magnet will not stick to a lead pipe. If the scraped area is copper in color, like a penny, your service line is copper. A magnet will not stick to a copper pipe.

When did they stop using lead pipes in homes? ›

The federal government banned the use of leaded pipe and solder in new plumbing systems in 1986, but many remaining pipe networks in older cities and homes predate the policy; the EPA estimates there are still 6 to 10 million lead service lines across the country.

Who is responsible for lead pipes? ›

This is known as the private or supply pipe. All the plumbing inside your home to the kitchen tap is the responsibility of the property owner.

How worried should I be about lead pipes? ›

There is no safe level of lead exposure. But millions of old lead pipes contaminate drinking water in homes in every state across the country. We need the EPA to do its part to replace lead pipes equitably and quickly.

What cities have high lead levels in water? ›

High lead levels have been found in tap water in Baltimore, Chicago, Detroit, Milwaukee, Newark, New York, Pittsburgh, Washington, D.C. One NRDC analysis found that between 2018 and 2020, 56 percent of the U.S. population drank from water systems with detectable levels of lead.

What to do if your water tests positive for lead? ›

Contact your water utility or a licensed plumber to determine if the pipe that connects your home to the water main (called a service line) is made from lead. Run your water. Before drinking, flush your home's pipes by running the tap, taking a shower, doing laundry, or doing a load of dishes.

What happens if you have lead pipes in your house? ›

The Centers for Disease Control say that even at low levels, lead has been “shown to affect IQ, ability to pay attention, and academic achievement.” There are several potential sources of lead in your home plumbing that can get into your drinking water: Service line connecting the water main to your house.

Do water filters remove lead? ›

Answer: Some filters can remove lead from drinking water. If you use a filter, be sure to get one that is tested and certified by an independent third party. Be sure to read the manufacturer's directions to learn how to properly install and use your filter and when to replace it.

Can I test my water for lead myself? ›

If you just want to check your water for lead, and you don't care about testing for other chemicals, we recommend the Safe Home Do-It-Yourself Lead in Drinking Water Test Kit.

How to test for a lead pipe? ›

To check if it is lead along as much of its length as possible, look out for the following:
  1. colour - unpainted lead pipes appear dull grey.
  2. they are also soft and have irregular bends.
  3. the scratch test - if they are gently scraped you'll see the shiny, silver-coloured metal beneath.

Is it worth replacing lead pipes? ›

If the pipework inside the house is also lead, it's probably worth replacing it from the stop tap with copper simply to make it easier to work on. Obviously, your safety is paramount, but it might be worth a bit of further investigation before you start excavating.

How much to replace a lead water pipe? ›

Some may even replace lead pipes for free, though generally, this can take some time as this work is not a priority. Average main water pipe replacement cost from mains to house: Water company/WIAPS approved – £500 - £1,000. Private plumber –£400 - £800.

How do you know if there is lead in your drinking water? ›

The only way to know whether your tap water contains lead is to have it tested. You cannot see, taste, or smell lead in water.

Is it worth replacing lead water pipes? ›

Should You Replace Your Home's Lead Service Pipe? For the reasons listed above, we highly recommend that people treat replacing their home's lead service pipe as part of an overall lead reduction strategy, not as a silver bullet.

How long do lead water pipes last? ›

Between 1900 and 1950, a majority of America's largest cities installed lead water pipes—with some cities even mandating them for their durability. And because lead pipes can last 75 to 100 years, the legacy of lead pipes lives on today.

Do lead drain pipes need to be replaced? ›

Lead was used in the years before the 1980's, in nearly everything. From electronics to kitchens and plumbing. The government has since banned the use of lead in production for water pipes and other pipelines. If you have any lead pipes in your pipe network, you should be replacing these lead pipes with plastic.

Is it safe to drink water from old lead pipes? ›

Lead can cause serious health problems if too much enters your body from drinking water or other sources. It can cause damage to the brain and kidneys, and can interfere with the production of red blood cells that carry oxygen to all parts of your body.

References

Top Articles
Latest Posts
Article information

Author: Eusebia Nader

Last Updated:

Views: 6021

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Eusebia Nader

Birthday: 1994-11-11

Address: Apt. 721 977 Ebert Meadows, Jereville, GA 73618-6603

Phone: +2316203969400

Job: International Farming Consultant

Hobby: Reading, Photography, Shooting, Singing, Magic, Kayaking, Mushroom hunting

Introduction: My name is Eusebia Nader, I am a encouraging, brainy, lively, nice, famous, healthy, clever person who loves writing and wants to share my knowledge and understanding with you.